| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Seat Belt | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002LJ000HX |
| Title: SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL (2008 Sequoia) | ||
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected
.
2. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
(a) Remove the front seat assembly
.
3. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the front seat assembly
.
4. REMOVE FRONT SEAT CUSHION SHIELD INNER LH (for Manual Seat)
5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Manual Seat)
|
(a) Disconnect the 2 connectors and disengage the 4 clamps. |
|
(b) Remove the nut and front seat inner belt LH. |
6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Power Seat)
|
(a) Disconnect the 2 connectors and disengage the 4 clamps. |
|
(b) Remove the nut and front seat inner belt LH. |
7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (w/ Climate Control Seat System)
|
(a) Disconnect the 2 connectors and disengage the 5 clamps. |
|
|
(b) Remove the nut and front seat inner belt LH. |
8. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Manual Seat)
|
(a) Disconnect the connector and disengage the 3 clamps. |
|
(b) Remove the nut and front seat inner belt RH. |
9. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Power Seat)
|
(a) Disconnect the connector and disengage the clamp. |
|
(b) Remove the nut and front seat inner belt RH. |
10. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (w/ Climate Control Seat System)
|
(a) Disconnect the connector and disengage the clamp. |
|
|
(b) Remove the nut and front seat inner belt RH. |
|
|